The turnbuckle scaffold is composed of vertical rod connecting plate, buckle joint bolt, horizontal rod end buckle joint, horizontal rod, inclined rod, inclined rod end buckle joint and vertical rod.

The novel and beautiful disc is used to connect the cross bar, and the bottom is provided with a connecting sleeve. The cross bar is made of a plug with a pin welded on both ends of the steel pipe. To build the turnbuckle scaffold, the construction scheme shall be formulated in advance, and then it shall be built step by step according to the construction scheme from bottom to top, vertical pole, cross bar and diagonal tie rod. In the construction process, the construction shall be carried out in strict accordance with the construction specifications of turnbuckle scaffold. It is strictly prohibited to use beyond the load, and the construction personnel shall also take safety measures according to the regulations, and chasing on the construction platform is not allowed; Construction is not allowed in windy, thunderstorm and other weather. The dismantling of the turnbuckle scaffold shall be planned uniformly and dismantled in the reverse order of the erection. During the dismantling, attention shall also be paid to handling with care, and direct throwing is strictly prohibited. The disassembled parts shall also be stacked neatly. The storage of turnbuckle scaffold shall be stored separately according to different parts, which shall be stacked neatly and placed in a dry and well ventilated site. In addition, the storage place shall be a place with corrosive objects.