New formwork support system
In the construction process, in addition to the quality of construction equipment, it will also affect the quality of construction projects. The level of construction workers has the same impact on construction quality. Compared with low-level construction workers, the level and quality of construction are different. Therefore, in construction, the quality of building materials is often linked to the construction technology of workers.
The outstanding advantage of the new steel support formwork system is that the operation is very simple. Under the guidance of after-sales technicians, ordinary construction personnel can learn it only once or twice, and the measured value after formwork removal can reach more than 98%.
Advantages of the new steel support formwork system:
It has strong universality and flexible expansion, and can adapt to most construction environments.
The formwork joints are closely connected and closed accurately, which solves the problem of formwork leakage.
Strong operability, small and light parts, convenient operation, reducing the workload of workers.
Nowadays, the requirements for construction are becoming more and more strict. The actual measurement and acceptance method has been implemented on the site. Various construction problems have occurred in many projects. It is urgent for the construction unit to improve the construction quality level
Most of the concrete pouring formwork reinforcement materials at the construction site adopt steel pipe wood reinforcement technology. This kind of traditional reinforcement material, the strength of the formwork system is poor, the construction operation is cumbersome, and the construction operators are relatively casual. There are often "running" and "swelling" phenomena in the process of concrete pouring, so the construction quality is difficult to guarantee. Moreover, the repeated construction rate of timber is low and the service life is long
At present, the new shear wall formwork reinforcement system of "replacing wood with steel" is favored by more and more construction units and strongly recommended by the Architectural Association. Its design is exquisite, scientific and reasonable, safe and reliable, light weight, and adopts the construction technology of steel instead of wood. It is intuitive and easy to understand, easy to build and disassemble, and can be operated and built under the guidance of some relevant professionals. There is no need to worry about the unqualified formwork acceptance, and there is no need for secondary plastering and primary molding. It avoids the trouble of rework and repair, effectively prevents the construction problems such as formwork expansion and formwork running, and easily solves the problem of shear wall reinforcement.
Characteristics of new shear wall reinforced formwork support system
1. Fixed support is adopted, with high degree of standardization of components and good formwork removal quality.
2. The construction is convenient and the operation difficulty of workers is low, which is conducive to the improvement of work efficiency and construction period.
3. Replacing wood with steel can save wood, with many turnover times and can be reused for many times.
4. Convenient and reliable operation, simple and safe construction and easy management.
5. It plays a significant role in the forming quality of concrete components of internal and external corners and short leg shear walls.
6. It has both specificity and versatility to avoid workers' random operation.
7. Reduce the labor intensity of workers, save labor and cost.
Scope of application:
It is applicable to all kinds of shear walls, frame shear wall structures, frame structures, wall columns, large underground parking lots, etc.
Jgw Anbei No. 13032202000134
