When building a building, builders cannot do without the new shear wall formwork support system, new roof support system and scaffold. Now let's introduce these three kinds of building materials, which are indispensable in architecture and widely used now.

New shear wall formwork support system

1. Good molding effect.

The new steel support system has high strength and stability, and the solid reinforcement system can eliminate the rising die, slurry leakage and structural deformation. In particular, it plays a great role in improving the measured results.

2. Low cost.

The turnover times of the new steel support system can reach more than 300 times. The single use cost is low and the residue rate is high. It is a relatively environmentally friendly material.

3. It is conducive to safe and civilized construction.

The new steel support system is adopted for construction. After demoulding, there is no garbage, rust, fire hazard, chain saw residual wood pin and other construction garbage on the site. The construction site is clean and fully meets the green building construction standards.

4. Simple technology and simple operation.

The new steel support system has the advantages of simple installation, simple operation and easy learning. Welcomed by site installation workers.

5. High construction efficiency and short construction period.

Compared with the traditional formwork steel support system, the new formwork steel support system has high construction efficiency, which can greatly shorten the construction period, save the management cost, and shorten the development cycle of real estate developers.

6. Wide application range.

The new formwork support system is applicable to all shear wall structures, frame shear structures, frame structures and wall columns.

Roof formwork support system:

The structure is divided into main keel and secondary keel, in which the main keel is retractable (the extension length specifications are 4m, 3M and 2m), and the secondary keel is non retractable (the length specifications are 3.0m, 1.8m and 1.4m).

Scaffolding

The turnbuckle scaffold is composed of vertical rod connecting plate, buckle joint bolt, horizontal rod end buckle joint, horizontal rod, inclined rod, inclined rod end buckle joint and vertical rod.

The novel and beautiful disc is used to connect the cross bar, and the bottom is provided with a connecting sleeve. The cross bar is made of a plug with a bolt welded on both ends of the steel pipe. To build the turnbuckle scaffold, the construction scheme shall be formulated in advance, and then it shall be built step by step according to the construction scheme from bottom to top, vertical pole, cross bar and diagonal tie rod. In the construction process, the construction shall be carried out in strict accordance with the construction specifications of turnbuckle scaffold. It is strictly prohibited to use beyond the load, and the construction personnel shall also take safety measures according to the regulations. Chasing on the construction platform is not allowed; Construction is not allowed in windy, thunderstorm and other weather. The dismantling of the turnbuckle scaffold shall be planned uniformly and dismantled in the reverse order of the erection. During the dismantling, it shall also be handled with care, and direct throwing is strictly prohibited. The disassembled parts shall also be stacked neatly. The storage of turnbuckle scaffolds shall be stored separately according to different parts, which shall be stacked neatly and placed in a dry and well ventilated place. In addition, the storage place should be a place with corrosive objects.