The price of the new formwork support system can not be determined. Because each construction project is different, there are different drawings, different quantities required, and whether there is a customized system, these uncertain factors determine that the price of each project is different, but the application of formwork support system in the construction of construction projects is widely recognized by builders.

Application of formwork support system in Construction Engineering

With the development of China's economy, there are more and more large-scale reinforced concrete buildings in cities. The high formwork system in reinforced concrete construction must have high requirements of stiffness, strength and stability.

Member material requirements:

The steel pipe shall comply with the national standard gb/t700. The surface of the steel pipe shall be straight and smooth, without crack delamination and hard bending, and the deviation of the tangent of the two ends shall be less than 1.7 mm; The allowable deviation of wall thickness is - 0.35 mm, and the allowable deviation of outer diameter is ＜ - 0.5mm. The sum of the corrosion depth of the inner and outer sides of the steel pipe shall not be greater than 0.50 mm, and must be coated with anti rust paint for anti rust treatment.

Calculation of formwork

With reference to some contents in the design and use safety of high support frame for fastener type steel pipe formwork, calculate and check each part of the high support formwork from the following aspects: formwork panel calculation; Calculation of through beam bolts; Calculation of beam bottom formwork; Calculation of beam bottom support; Calculation of anti sliding of fasteners; Stability calculation of vertical pole; Calculation of foundation bearing capacity of vertical pole.