Effective protective measures shall be taken during transportation, and the binding shall be firm to prevent deformation and damage to the coating. The mode of transportation can be highway, railway, sea and air transportation. Domestic transportation is generally by car, while foreign transportation is generally by sea and air transportation.

The following principles should be followed for packaging. The rods at the same part should be packed together as much as possible, and can be transported together with the installation schedule to ensure the timely supply of the components required on the site. Otherwise, there will be many components piled up on the site, but the rods are not matched, which will affect the installation schedule. The package shall be firm, and no loose package shall occur during transportation. It leads to confusion of components and affects the handover of construction site. In order to save transportation costs, the component box should be graded as much as possible. For example, the small box can be placed inside the large box, and the thin tube can be placed inside the thick tube. The components in each packing box must correspond to the packing list one by one for easy handover and searching.

After the steel back ridge is packed, it will be transported to the construction site, and the workers will build it according to the construction situation and the characteristics of the steel back ridge.

Characteristics of new type shear wall reinforcement formwork support system

1. The fixed support is adopted, the component is highly standardized, and the formwork removal quality is good.

2. Convenient construction and low operation difficulty of workers are conducive to the improvement of work efficiency and duration.

3. Replacing wood with steel can save wood, and it can be reused for many times.

4. The operation is convenient and reliable, the construction is simple and safe, and the management is convenient.

5. It has a significant effect on the forming quality of concrete members of internal and external corners and short-leg shear walls.

6. It has both specificity and versatility to avoid random operation by workers.

7. Reduce labor intensity, save labor and cost