必发365

Service Hotline:0335-7168696
News
News
News

Introduction of new formwork support and new shear wall support

Time:2021-12-01 08:52:28View count:

The new shear wall formwork is composed of telescopic main keel, vertical steel clad wood, external corner lock, connecting rod, L-shaped beam clamp, through bar, internal corner lock and backrest lock.

All materials are cold rolled steel.

Cold rolled steel is steel produced by cold rolling. Cold rolling is to further thin the steel plate to the target thickness at room temperature. Compared with hot-rolled steel plate, cold-rolled steel plate has more accurate thickness, smooth and beautiful surface, and also has various superior mechanical properties, especially processing properties. Because the cold-rolled original coil is brittle and hard, it is not suitable for processing, so generally, the cold-rolled steel plate is required to be delivered to the customer after annealing, pickling and surface leveling. The maximum thickness of cold rolling is less than 0.1-8.0mm. For example, the thickness of cold rolled steel plate in most factories is less than 4.5mm; The minimum thickness and width are determined according to the equipment capacity and market demand of each factory.

The difference between cold rolled steel and hot rolled steel lies not in the smelting process, but in the rolling temperature, or the end temperature of rolling. If the final rolling temperature is lower than the recrystallization temperature of steel, it becomes cold rolled steel. Hot rolled steel is easy to roll and has high rolling efficiency, but under hot rolling conditions, the steel is oxidized and the product surface is black and gray. Cold rolled steel requires high mill power and low rolling efficiency, and intermediate annealing is also required to eliminate work hardening in the rolling process, so the cost is also high. However, cold rolled steel has bright surface and good quality, and can be directly used to process finished products. Therefore, cold rolled steel plate is widely used.

The components of the new formwork support system have small volume and light weight, and the weight of the longest component is no more than 30kg. Most components can be manually transported and disassembled during construction. While the construction project with narrow site has obvious advantages, it can be used in other places.

The new shear wall formwork support adopts water-based electrophoretic coating treatment technology. Wear resistant, corrosion-resistant and rotated for more than 350 times. Since entering this field in 2014, Qinhuangdao Shengchuan building materials has continuously innovated, invested a lot of human and material resources, continuously upgraded and transformed according to the requirements of building construction, updated the products to the fourth generation, customized the template support for many construction companies, effectively solved the difficulties in construction and helped them build buildings one by one.

The new shear wall formwork supports the close cooperation of various components. During the concrete pouring construction, it can prevent formwork leakage. After the formwork is removed, there is no hollowing and cracking, and there is no need for secondary plastering, so as to achieve the construction effect of fair faced concrete. At the same time, due to its simple and easy operation, it is convenient for the management of construction personnel on the construction site and ensure the beauty of the construction site, It has greatly improved the corporate image of the construction unit.



必发365官网(中国)乐趣网投天天必发
必发365官网(中国)乐趣网投天天必发
必发365官网(中国)乐趣网投天天必发
必发365官网(中国)乐趣网投天天必发
网站地图网站地图
友情链接:安鑫娱乐  大发welcome  bti体育  BG大游  leyu  尊龙凯时  ca88  尊龙凯时  ag亚娱  大奖国际  尊龙凯时  海博论坛