The back edge of formwork steel is a new type of structural material.

Cold rolled steel is used to weld the steel back edge of the formwork to form a frame type composite structure system with strength and rigidity, so as to increase its stability, bear the construction load and ensure the quality of poured concrete.  

The new shear wall steel support system has the following characteristics:

1. Good molding effect.

The new steel support system has high strength and stability, and the solid reinforcement system can eliminate the rising mold, slurry leakage and structural deformation.

2. Low cost.

The turnover times of the new steel support system can reach more than 400 times, the single use cost is low, and the residue rate is high.

3. It is conducive to safe and civilized construction.

The new steel support system is used for construction. After demoulding, there is no garbage, rust, fire hazard, chain saw residual wood pin and other construction garbage on the site. The construction site is clean and meets the green building construction standard.

4. The technology is simple and the operation is simple.

The new steel support system is easy to install, operate and learn. During installation, only simple training is required, and anyone can install it.

5. High construction efficiency and short period.

Compared with the traditional formwork steel support system, the new formwork steel support system has high construction efficiency, can significantly shorten the construction period, save management costs for departments, and can also shorten the development cycle of real estate developers.

6. Wide application range.

The steel support system is applicable to all shear wall structures, frame shear structures, frame structures and wall columns.